PPF and ceramic cure times: planning bays for multi-day jobs
Paint protection film and ceramic coatings don’t end when the installer puts the tools down. Cure time decides when a car can leave — and how long it owns the bay. Here’s how detail and protection shops plan multi-day work without stalling the rest of the schedule.
3 min readThe BayLane team
On this page
In a detail or protection shop, the hardest jobs to schedule aren’t the long ones — they’re the ones where the car stays after the work is done. A full-front PPF install might be six hours of labour and two days in the bay. A ceramic coating is often finished by afternoon and still shouldn’t see rain until tomorrow.
If your calendar only knows labour hours, it will happily book the next car into a bay that’s still holding a curing coating. Here’s how to plan around cure time instead.
Know the stages of the job
Break every protection job into stages, because each stage has different needs:
- Wash and decontamination — wash bay, an hour or two.
- Paint correction (if sold) — good lighting, anywhere from a few hours to a couple of days.
- Prep and install — the clean, enclosed bay.
- Cure or settle — indoors, untouched. No labour, but the bay is taken.
- Inspection and handover — final wipe, edges checked, care instructions.
Stage 4 is the one calendars forget. It has no tech assigned, so it looks like free time.
Ceramic coatings
Most professional coatings need to stay dry and indoors for roughly the first 12–24 hours while the surface cures, and take one to a few weeks to cure fully. Many shops keep the car overnight so it leaves in daylight with the surface already hard; infrared curing lamps can shorten the indoor stage when the product allows it.
- Plan: correction and coating on day one, overnight hold, handover the next morning.
- Tell the customer: no washing for about a week, no automatic car washes, and what to do if it rains on the way home.
Paint protection film
Film is installed wet, and the moisture under it takes time to escape. Shops commonly keep the car overnight after a large install so edges can be checked and re-heated the next day, and ask customers not to wash the car for several days. Small haze or water pockets that remain usually disappear over the following days to weeks as the film settles.
| Job | Typical labour | Typical time in the bay |
|---|---|---|
| Partial front (bumper, partial hood, mirrors) | 3–5 hours | Same day, or overnight in cold weather |
| Full front | 6–10 hours | 1–2 days with an overnight hold |
| Full body | 2–4 days | 3–5 days including inspection |
Ranges vary with the car, the film, and your installers — use your own history once you have it.
Scheduling rules that keep the shop moving
Book the bay for the cure, not just the install
A coating that cures overnight holds its bay until the morning handover. Put that whole window on the calendar so nobody books into it.
Protect the clean bay
Your enclosed, dust-controlled bay is your most valuable square footage. Washes, interior details and wheel jobs shouldn’t land there just because it’s free at 10:00 — keep it for the work that can only happen there.
Stage cars so the clean bay never waits
Do the wash and correction for tomorrow’s coating in another bay today, so the clean bay goes straight from one install to the next.
Count the cars still on the lot
A car that’s finished but waiting for pickup still takes space. Keep a running list of what’s done, what’s paid, and what’s still waiting, so a busy Friday doesn’t end with nowhere to park Saturday’s jobs.
How BayLane handles it
In BayLane, a service can hold its bay for whole days, so a coating’s overnight cure or a full-body install shows on the lane board as one solid block — and the bay isn’t offered to anyone else until it’s done. Bays carry equipment like “enclosed clean bay” or “IR curing lamps”, so a coating can only be booked where it can actually be done, and simpler work is kept out of that bay. Cars that are finished but not yet picked up show on the lot until they leave.
The principle works on any calendar: a car that’s curing still owns the bay. Plan for it, and multi-day work stops ambushing the rest of your week.
More like this, in your inbox
New guides for running a busy shop and what’s new in BayLane. A few emails a month at most.
No spam. Unsubscribe from any email in one click.
Keep reading
How to schedule a multi-bay shop without double-booking the lift
Most scheduling messes in a multi-bay shop come from one mistake: treating every bay as interchangeable. Here’s a practical way to match jobs to the bays that can actually do them — and keep your specialised bays free for the work that needs them.
4 min readThe BayLane team
Passing card fees to customers in 2026: what shops need to know (not legal advice)
Card fees eat 2.5–3.5% of every ticket. Many shops now pass some of that on — but the rules depend on the card type, your state and your processor. Here’s a plain-language overview of surcharges, cash discounts and dual pricing, and the questions to ask before you start.
3 min readThe BayLane team